Miscellaneous

Lenticular has become increasingly popular in recent years. Especially with the mainstream coverage given to 3D movies and 3DTVs, many advertisers and merchandisers have seen ample opportunity to take advantage of the technology. For a theatrical film that is released… Continue Reading →

As noted in earlier posts, nice lenticular requires precision alignment between the lens and the printed imaged. Because of this the printing technology necessary for making a quality lenticular is rather advanced. There are some home kits available for lenticulars… Continue Reading →

Because lenticular images utilize a lens, there is an optimal viewing distance. For 3D images (those on vertical lenticules) a viewer significantly beyond the optimal viewing distance will not see any effect because the relative distance between the two viewing… Continue Reading →

As an alternative to printing directly on the lens interlaced images can be printing on a substrate and later adhered to a lens. The substrate must be a flat surface so that the lens is attached at a uniform distance,… Continue Reading →

Printing can be on a substrate that is adhered to a lens or directly on the lens itself. When printing directly on the lens, the ink is applied to the flat side of the lenses. In this printing method it… Continue Reading →

Drawing three dimensional images are difficult to create because of the inherent two dimensional nature of the drawing surface. Over years of refinement artists have found ways to depict three dimensional items in two dimensional mediums. Perspective, foreshortening,  and ocular… Continue Reading →

Lenticular gives a motion or 3D effect because the lens can be used to focus on distinct images, each in unison. Similar to a movie that has frame after frame of still images flashed quickly a raw lenticular image (viewed… Continue Reading →

Horizontal lens orientation is used when 3D is not required. Because humans eyes are stationed horizontally along the face each eye will have the same viewing angle of a horizontal lens. This means that both eyes see a single image,… Continue Reading →

1. Vertical OrientationVertical lenticular lenses deliver separate images to the left and right eye of an observer. With a vertically oriented lens focusing on a vertically interlaced series of images it is possible create a 3D effect by utilizing the… Continue Reading →

Ten things to know (and places to learn) about lenticular technology.1. Vertical Orientation2. Horizontal Orientation3. Image Interlacing4. Stereoscopy5. Printing on the Lens6. Printing on a substrate7. Ideal Viewing distance8. Image Layer Separation (3D)9. Printing Technology10. Popular Uses of Lenticular Imagery… Continue Reading →

I recently had the chance to experience an interesting piece of art by a renowned artist. That work now is gone, it lasted less than a fortnight. It was unsigned, untitled, and even the artist it is credited to is… Continue Reading →

The top switch slider is broken, it feels like it does not engage, to fix the thing the remote must be opened. The front of the remote says RC32, there are 6 screws that need to be removed to take… Continue Reading →

The box and marketing material for Solidworks have always had shiny renderings plastered all over them. Unfortunately the software that created them (Photoworks and then Photoview 360) was always a part of the Professional package. Then, last summer, they allowed… Continue Reading →

I’d seen some posts about this service months ago and signed up a while back, I guess there was a long line to get in but I just got my invite to check things out. I’m a big google fan… Continue Reading →

Solidworks just announced they need one lucky user to roam the halls of Solidworks world 2010 with a camera and an all access pass. To do what exactly? Gather intel from top SW Brass about new products and features, check… Continue Reading →