QIDI TECHNOLOGY 3D Printer Review
Anyone familiar with the FlashForge Creator Pro will likely notice that the QIDI Tech 3D printer is practically an equivalent 3D printer. Both are also based on the MakerBot Replicator 2X. However, the QIDI is currently priced less than the FlashForge and much less than the price of the MakerBot while offering a similar ease of use and quality fabrication. Whether a novice hobbyist or an experienced engineer, the QIDI Tech device is a 3D printer worth looking at. Over 336 users on Amazon who purchased this 3d printer review and rate it amongst the best at a 4.6/5.0. Though newer to the arena of 3D printing, the company responsible for introducing the more economical model created a machine with a number of attractive features, optional upgrades and excellent customer support. At the time of this posting, this QIDI Tech dual extruder 3d printer was available for $629 on Amazon…but be sure to click this link to check the Qidi Tech 3D printer current Amazon price.
QIDI 3D Printer Basics
The sturdily constructed QIDI Tech has a metal frame and weights little more than 46 pounds (21 kilograms). The desktop device measures 18.3 x 12.6 x 14.76 inches (465 x 320 x 375 millimeters) and features a heated printer bed that creates objects up to 9 x 5.9 x 5.9 inches (230 x 150 x 150 millimeters) with an overall print volume of 313 cubic inches or five liters. The plate is constructed from aviation grade aluminum, which prevents warping from the 120 Fahrenheit temperature. The circuitry has also been enhanced to prevent static while printing.
The printer comes well packed and nearly fully assembled. In addition to the printer, the box contains:
• 1 roll of ABS filament
• 1 roll of PLA filament
• 2 filament spool holders
• 1 roll of painter’s tape
• A USB cable
• Power cable
• 4GB SD card
• Wiring harnesses
• Filament tubing
• Wiring harness holder
• Tool Box complete with fasteners and tools
The assembly is straight forward and simple due to the easy-to-follow instructions on the SD card. Some find that the YouTube videos are also quite helpful for learning to get started. Users may become frustrated when looking for the SD card slot, because it is installed inside the printer on the lower right-hand platform corner. Mount the dual extruder into the cradle, mount the filament holders, the filament, and attach the plexi-glass top, walls and door. Having an extra pair of hands when installing the plexi-glass also reduces set-up time.
|Fused Deposition Modeling(FDM)||✓|
|Layer Resolution||100 Micron|
|Connectivity||SD Card/USB Cable|
|Support Software||Replicator G/Makerware|
|Printer Machine Size(LxWxH)||465x320x375mm|
3D Printing with QIDI TECH
Connect the printer to a desktop PC or laptop and download the recommended MakerBot Replicator software. The printer is compatible with many different common operating systems from Linux and Mac OSX to Windows. Before starting an initial build, level the print platform according to the instructions. With the printer head positioned so close to the back of the bed, leveling can be a challenge.
The dual extruders enable multi-color printing in layer thicknesses that adjust from 0.1 to 0.3 millimeters. The machine functions either via the PC tether or the SD card. Later upgrades may include wireless function. The printer needs occasional recalibrating between builds. However, for the price and the quality of the prints, this is a minor inconvenience.
If using Cura, Slic3r and S3D to create precision parts, consumers must take into consideration that the finished object will be reduced by up to nine percent in both the X and Y directions. An object having a 10 millimeter size design ends up being reproduced at 9.1 millimeters. Avoiding the problem entails expanding the STL or G code to compensate.
3D Printer Support & Service
The QIDI Tech 3D printer does not have the option of an extended warranty. However, whether having difficulty with set-up, operation, damaged or missing parts, the company’s customer support team so what they can to ensure customer satisfaction. Staff members are known to respond quickly to emails and provide answers to questions, guidance and a wealth of helpful tips. Replacement parts also tend to arrive faster than expected. Depending on the part needed, the company may supply the need at no cost.
This QIDI Technology dual extruder 3d printer review relies on specs and data from hundreds of Amazon purchasing users. Be sure to research the latest reviews and Qidi Tech 3D printer current Amazon price to make sure this is the best 3d printer for you.
Have you used the QIDI TECHNOLOGY Dual Extruder 3D Printer? Please comment and let the community know your thoughts, rating, or review. You may also like to see the QIDI TECHNOLOGY X-one 3d printer review.
Wondering how you might put your new 3D printer to use? Check out these five unique 3D printing projects that will challenge you to think creatively.
QIDI Technology is a reliable quality source I can trust. The mighty board of my Flashforge was bricked due to upgrading with Sailfish firmware, I had to replace with QIDI motherboard. I got the mighty board from quick service of QiDi. After the replacement of the board, my 3D printer worked flawless as normal.
What resolution is this printer
Layer resolution is 100 micron according to the QIDI TECHNOLOGY 3DP-QDA16-01 Dual Extruder Desktop 3D Printer specs.
I purchased one of these printers and am excited to start using it. Unfortunately, the manual for it comes on an SD card that got misplaced. I haven’t been able to find the manual available online. Does any one have advice on how I might get a copy of the lost files somewhere?
I can email you a copy
i also need a copy of them if you would not mind
Can this reach temperatures up to 240c?
Most regular hotends can get up to 240c without risking damage to the PTFE tube, yes. However, this is the absolute upper limit for temperature–do not go any higher unless you have upgraded to an all-metal hotend or you WILL damage it.
I got my extruder up to 280C but i haven’t tested any hotter
Can someone please tell me the customer support for my new qidi 3d printer? I have some issues and need to contact them thank you so much!
Here is their customer support contact page with email, phone, skype, etc. http://www.qd3dprinter.com/contacts/
Received my qidi 3d printer today, set everything up and there was a small little chip in ththe front of the box and I cannot find anywhere that this would go? Please help!
My printer arrived today, QIDI TECHNOLOGY Dual Extruder 3D Printer, there are two grey cables that came loose with the printer that are not featured in the documentation and there is no mention of where or how to install them. One of the cables has female flat black connectors on the other has a label 301.
Where can I access / download and install drivers for my iMAC running macOS High Sierra version 10.13.1 ?
Hi, a couple of suggestions which I think would improved the experience of unpacking and owning the printer:
1) Please pack the plastic front more carefully, I’ve read online how someone else has experience the same damaged front cover as I did, because its at the bottom of the packaging with no protection.
2) Please improved the documentation, the photographs are and descriptions are not great and I had to resort to youTube to figure out what I needed to do.
3) The spare cables that came with my printer are no mentioned in the documentation, these should be added just to say, they are spares…I had to ask as I had no glue what they were for.
4) Document the samples on the SD card, detailing which sides are required for the prints.
In general the documentation could be improved.
My one machine using the same programs as the other 3 has stopped printing half way. next problem, the x axis stepper motor is not switching off once the printer head gets to the end, although the limit switch light comes on.
Hi. Can someone tell me what laptop feature to support qidi firmware. I am looking for a macbook but keep asking myself if the macbook pro is a must or can i go only with the regular macbook
Does any one know which extruder or spool is the pla. I’m using up the orange spool on the right and don’t know if im supposed to buy pla or abs to replace it.