Below is a table of content for CSWP Core Exam review. Some sections have been posted here, the full compilation will be available as an ebook shortly. B. Section 1 of the CSWP B-1. Interpreting the Drawing B-2. Sketching B-3. Boss and Cuts and End Conditions B-4. Draft, Fillet, Chamfer B-5. Pattern and Mirror […]
Solidworks Certification Training: Table of Contents Read More »
B. Section 1 of the CSWP The first section of the CSWP covers sketching and feature creation. It is typically 5 questions requiring the creation of two unique models. The first model created will be used to answer questions 1-3. Each question asks for the mass, or sometimes the center of mass, of the model.
Master SOLIDWORKS faster with tutorials & CSWP online training. To properly utilize the weldments features for Solidworks an understanding of the cut list structure is required. Once the Weldment feature is added to a part a few changes are made, including a change from “Solid bodies” to “Cut-List” in the feature manager. This cut list
Cut List Folder management in the Weldment Part – CSWP Weldments Read More »
The box and marketing material for Solidworks have always had shiny renderings plastered all over them. Unfortunately the software that created them (Photoworks and then Photoview 360) was always a part of the Professional package. Then, last summer, they allowed all beta testers access to the professional suite. During that time I poked around a
Weldments are a part of the Solidworks software that are intended to be used for parts that will require welding. It leads to reason then that small details, such as welding gaps in lengths, should be handled in an easy and intuitive fashion. Sure enough, one of the built in options when inserting weldment members
Placing gaps at corners and segment intersections – CSWP Weldments Read More »
To start creating a weldment a path for each member must be present. This means a sketch must be created to represent the members paths. For simple boxes and very basic weldment parts sketches can be laid out in a traditional 2d fashion, but to really control things it is typically easier to create a
It is a simple fact that weldments are not going to just be made up of members. Welding can create a strong bond, yes, but there will also be a need for bracing to transfer the loads correctly. To do this many beams get cross braces of smaller sizes or just a simple gusset. When
It would be nice to have a free, lightweight, platform independent, user friendly, powerful CAD software that works for everything. Unfortunately most CAD packages only deliver on a few of these criterion. In an attempt to broaden my knowledge, and to find out what is out there I started looking at a variety of 3d
It would be nice to have a free, lightweight, platform independent, user friendly, powerful CAD software that works for everything. Unfortunately most CAD packages only deliver on a few of these criterion. In an attempt to broaden my knowledge, and to find out what is out there I started looking at a variety of 3d
When creating weldments one of, if not THE, most important dimensions is the length of each segment. Depending on the end condition (flat/butted) this may be the only value needed to actually manufacture the cut list of a given profile. For this reason the trim/extend tool is extremely useful. If structural members are created in
