It’s never to early to start deciding on your itinerary for break out sessions at Solidworks World. Back by popular demand, after a one year lapse, is “Stump the Chumps”. This panel of Solidworks power users will be available to answer all sorts of technical questions. Submit a problematic design or part prior to the […]
I’ve started to take a look at some of the breakout sessions and events to attend for Solidworks World 2010 and see how busy my days will actually be. There is a lot to be excited about but the one I’m most looking forward to is the Certified Solidworks User Event. This will be my
The jog feature in sheet metal is yet another tool that simplifies design features. Many times a 2 bend step is required for mounting, to avoid other features, or create a simple wall and using the jog feature combines them into one item. A few of the benefits of jog.In the feature manager there is
Ever cut yourself on the sharp metal edge of something? It’s annoying and can hurt really bad, luckily there is a feature that can be designed into your components to alleviate this problem. The Hem feature is an easy way to design out dangerous edges while also giving the vulnerable edge some much needed sturdiness.
Solidworks is going contest crazy this year trying to get people excited for Solidworks World 2010 (only 2 months till kickoff). Tomorrow they announce the winner of the First Timer Contest. One lucky user will get their first chance to attend Solidworks and all it took was a story of their “first time” with Solidworks.
No, Solidworks is not testing your ability to pitch a softball. The K-Factor for sheet metal is a variable used to define the neutral axis of bent material. A bend creates two types of stress on a material. Compression on the inside of the curve (creating a shorter inside distance) and tension on the outside
Bend deduction is used to calculate the exact dimensions of bends in sheet metal. This value is directly related to the material being used. It can be specified for an entire part using the “Sheet-Metal” feature. The value can also be changed on a per bend basis by editing the values of a specific bend.This
Bend allowance is used to calculate the exact dimensions of bends in sheet metal. This value is directly related to the material being used. It can be specified for an entire part using the “Sheet-Metal” feature. The value can also be changed on a per bend basis by editing the values of a specific bend.
Studying for this portion of the CSWP test is mostly conceptual. The options available here are only have subtle differences but in manufacture they can have a significant impact. Bend Allowance:Using a bend allowance the flat part will be longer than the distance of each flange combined. Bend Deduction:Using a bend deduction the flat part
Bending Calculation options in Solidworks- CSWP Sheet Metal Read More »
One of the best and worst parts about sheet metal design is that it is limiting. Just because something can be designed on a computer screen does not mean that it can actually be made, at least not economically. However, the up side to this is that once you know what can be done, so
